Viewable by the world

There are two main methods by which a system can be upgraded to Windows 10. 

  • In-Place Upgrade, where Windows 10 is installed on a system that already has Windows 7 installed. In most cases, this will preserve all user applications and data, as well as some user customization.
    • This method assumes that Windows 7 is up to date.
    • This method generally takes less time to complete and is recommended whenever possible. Please note that in some cases the Windows upgrade tool will not allow the user to proceed, in which case the upgrade must be done by Installing Windows from Scratch. Note: Users may need to reinstall applications due to changes in system permissions.
  • A Clean Install Upgrade involves erasing all data from the computer's drives and installing Windows 10 on the blank drive. This typically takes more time to complete and requires the user to reinstall all applications, configuration settings, and data.

In most cases, IT recommends that users first attempt an in-place upgrade using the Windows 7 to 10 In-place Upgrade Instructions. Installing Windows 10 from Scratch should be Plan B, as it involves more risk, and more effort.

Please note that regardless of which method is used, users should ALWAYS back up their important data before attempting the upgrade.

Procedure Summary

  1. Pre-upgrade:
    1. Perform a computer assessment to list all hardware, software, and data on the system.
    2. Ensure that all data and files are backed up
    3. Purchase a Windows 10 License if needed (it usually is not required)
    4. Prepare Windows 10 Install Media
    5. Install Windows 7 Updates
    6. Perform diagnostics on your computer to ensure it is sound
  2. Upgrade to Windows 10
  3. Post-Upgrade
    1. Verify that the upgrade was successful
    2. Ensure that all Berkeley Lab IT-recommended applications are installed
    3. Ensure that the system is configured according to Berkeley Lab IT recommendations

Full Instructions

  1. Preparing for a Windows 10 Upgrade

    1. Perform a Computer Assessment

      AssessmentConsiderations
      Software Assessment


      What applications will be needed in Windows 10?

      Are all applications compatible with Windows 10?

      https://developer.microsoft.com/en-us/windows/ready-for-windows#/

      Do you have the installation media if you need to reinstall after the upgrade?

      Do you have the license keys available?
      Are any applications now redundant because of new Windows 10 features?
      Procure any Windows 10 compatible software if needed
      Hardware Assessment


      Are all computer and peripheral hardware compatible with Windows 10?

      https://www.microsoft.com/en-us/windows/windows-10-specifications

      Are drivers available for specialized peripherals and devices?
      Run hardware diagnostics to ensure the hardware is sound for Dell equipment, see https://www.dell.com/support/home/ca/en/cabsdt1/quicktest
      Procure any Windows 10 compatible hardware if needed
      Data Assessment
      		What data is currently on the system?
      Where is the data stored?
      How much storage is needed?
      Do you have the adequate backup capacity to prepare for the upgrade?

    2. Back Up all Data


      OptionDescription
      Recommended for most users: Druva inSync Backup
      • For most users, the best way to back up the files you need is to use Druva InSync, the Lab's recommended desktop backup solution.
      • Please note that by default, Druva will only backup data in a few select locations. Review the Druva settings and compare to the Data Assessment performed earlier.
      • Information on purchasing and configuring Druva is available here: Workstation Backups - Druva
      • Druva keeps all data for at least 90 days

      Copy to External Hard Drive

      • Copying select files and folders to an external hard drive can be an inexpensive option, particularly for users with a lot of data to back up. External drives are easily purchased through the eBuy Staples or CDW-G stores.
      • Unlike Druva backups, external hard drives cannot be accessed over the web, which may be an added convenience.

      Clone the Original Hard Drive

      • Advanced users may prefer to clone the entire hard drive before performing the upgrade.
      • Cloning the original disk ensures the ability to revert back to the original hard drive if something goes wrong with the upgrade to Windows 10, but does require more advanced skills to avoid damaging your system.
      • Before commencing this process, ensure that the new drive is of equal size or larger than the original drive. Hard drives and docking bays are easily purchased through the eBuy Staples or CDW-G stores.
      • Berkeley Lab IT recommends Clonezilla as a free, open-source tool for cloning drives. Other popular cloning software is reviewed here: Cloning Software for Window 10, 8, 7.
      • Users may wish to use either of the original or replacement hard drive. In most cases, either should work.

    3. Windows 10 Licensing

      In many cases, the Microsoft Windows license that was provided with your computer can be used to activate Windows 10 at no cost. For example, most Dell computers purchases by the Lab with Windows 7 Professional can be upgraded at no cost.

      For systems that do not have an eligible license, a Windows 10 Professional licenses can be purchased from software.lbl.gov for $138.62: https://go.lbl.gov/PurchaseWindows10.

      Once purchased the media and license key are mailed to you via interoffice mail. Please allow time for this process.

    4. Prepare Install Media

      1. Obtain at least a 16GB USB flash drive. 

      2. Create Windows 10 installer following Microsoft instructions, Install Windows from a USB Flash Drive, or

      3. Create Windows 10 installer using the Windows 10 creation media tool, see https://www.microsoft.com/en-us/software-download/windows10ISO.

    5. Ensure that Windows 7 is fully patched before upgrading (Optional)

      1. Using Windows Update, install all available Windows 7 patches. This may require several hours to install, and involve multiple reboots. This step is highly recommended and will increase the chances of a successful upgrade.

    6. Run hardware diagnostics (Optional)

      1. This will ensure that there are no hardware issues.

  2. Upgrade to Windows 10

    InstructionImage

    Boot the system into the BIOS

    Configure the boot options to boot from a USB device

    Insert either Windows 10 install flash drive prepared earlier

    Reboot the system


    For Dell Computers:


    Format the hard drive

    Select Download updates, drivers and optional features

    Select Next


    Note if Windows prompts you to enter an activation key, you will likely need to purchase a new license

    Review and accept the Windows 10 license terms and Accept

    Select Next button

    Choose What to Keep:

    Choose option 3 for a clean install (No files or apps will be transported to Windows 10 upgrade)


    Note that this will delete all files, apps, and settings


    Windows making sure one more time that you are really ready to perform the upgrade

    Select Next

    Ready to Install:

    Windows 10 performed its inventory and is ready to Install

    Note that Windows will display an error message if any hardware is incompatible

    Updates:

    Process is almost complete pending updates

    PC may restart during this process

    Privacy Settings:

    Change all settings to No

    Select Accept

  3. Post-Upgrade Steps

    1. Restore all hardware, software, and data that were identified in the Computer Assessment.
    2. If Windows prompts you to enter an activation key, you will likely need to purchase a new license.
    3. Ensure that all Berkeley Lab IT-recommended applications are installed
      1. Download BigFix from software.lbl.gov. IT highly encourages all users to install BigFix on all Windows systems. The Passive Mode client is recommended for systems which are used for experimental data collection or other special tasks that should not be interrupted.
      2. Install Sophos AntiVirus from software.lbl.gov.
    4. Ensure that the system is configured according to Berkeley Lab IT recommendations

      1. When possible, change the system's hostname to match the Lab-standard naming scheme for Windows 10 systems: 

        {user_id}-t{last 2digits of the DOE number}
        Example:
        User Joe A. Smith has upgraded to Windows 10on his system with DOE number 1234567. The recommended hostname would be jasmith-t67.

      2. Whenever possible, IT recommends that systems be added to the ActiveDirectory domain. Note that for users in Operations Divisions, the use of Active Directory is mandatory. Instructions to add a system to the domain are here: AD User Procedures.
      3. For systems that cannot be added to the domain, use BigFix Offers to configure the system, including
        1. Recommended security settings, which includes Windows updates
        2. Windows Firewall settings

      4. For additional recommendations, review Berkeley Lab's IT Best Practices

  • No labels

Was this site useful for you? Do you have any feedback or suggestions? Please click here to send your comments about this FAQ to IT.