Page History

{use-layout

...

:ITTELESERVICES}{section}{column}{div:class=ln6}{include:Cellular Services leftnav}{div}{column}

{column}
{div:id=telecontent}

h1. {builder-pagetitle}

h2. New\!  Improve your indoor cellular coverage\\

*AT&T Wireless and Verizon Wireless are now offering devices to enhance indoor cellular coverage, whether in your Laboratory office or at your residence.   These devices provide a signal boost in a range of approximately 5,000 square feet.  All that is required is a Laboratory-issued cellular phone and an internet connection.*

(For a comparison by service provider of cellular coverage in LBNL buildings, [click here|Coverage at LBNL].)

To Order:

Division approval is required.  Send email to [Telephone Services|mailto:[email protected]] and include the following:
* Your Lab cellular phone number and service provider
* Your office location or residential address
* Your project ID
* AT&T customers: all cellular phone numbers to be registered\\

h2. Product Description:

*AT&T Wireless -- 3G MicroCell*

Cost - $150.00 each (one-time)
Up to 4 AT&T cellular phones can be used at the same time
Up to 10 AT&T cellular phones can be registered to the MicroCell
Allows voice, text messaging, and data usage\*
Requirements:
* AT&T 3G cell phone or smart phone
* Internet connection\\

\*Note: use on the MicroCell will count against your calling and data plan\\

*Verizon Wireless -- Network Extender*

Cost - $199 each (one-time)
Up to 3 Verizon cellular phones can be used at the same time
Cellular phones do not need to be registered
Allows voice and text messaging only\* -- no data usage
Requirements:
* Verizon Wireless cell phone or smart phone
* Internet connection

*\*Note: use on the Network Extender will count against your calling and data plan* \\

| *Important: it is recommended that the device is placed in a room within 3 feet of a window and not in a basement or closet.  Place device at least 1 foot away from other wireless devices (i.e. WiFi).  Signal coverage boost may vary, depending on your location and structure.* |
{div}
{column}
{section}