![]()
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Digital LINAC LLRF Controller Chassis - Modulator 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| New System | Old System (pre 2025 Install) | ||||||||
| IO | Calibration | Old System IO | Measurement | ||||||
| Source Power Estimate | RF Monitor attenuation | Front End variable attenuation | Cable or Port Name | Record Distribution Chassis attenuation | Absolute Phase Noise | Spectrum (max temp) | |||
| AS1 Load FWD | LINAC1 Load FWR Patch Panel | PG12 | |||||||
| S Band Buncher FWD | 86 dBm - 76.8 coupling = 9.2 dBm at cable input | Patch Panel LI1838 | PG9 | ||||||
| AS1 FWD | LINAC1 Forward Patch Panel | PG11 | |||||||
| AS1 REV | LINAC1 Reverse Patch Panel | PG10 | |||||||
| KLY1 FWD | 102 | RF Distribution Chassis LI1824 | FE IN J6 | ||||||
| KLY1 REV | 82 | RF Distribution Chassis LI1824 | RE IN J1 | ||||||
| MO | 0 | 500 GHz to 3 GHz Multiplier LI1810 | 500 MHz IN PG1 | ||||||
| MOD2 Drive | Distribution Chassis Phase Control LI1834 | Amplifier 1 Drive, J5 | |||||||
| Digital LINAC LLRF Controller Chassis - Modulator 2 | |||||||
|---|---|---|---|---|---|---|---|
| New System | Old System (pre 2025 Install) | ||||||
| New System IO | Calibration | Measurements | |||||
| RF Monitor attenuation | Front End variable attenuation | Chassis Name | Cable or Port Name | Record Distribution Chassis attenuation | Absolute Phase Noise | Spectrum (max temp) | |
| AS2 Load FWD | Input power < (47 dBm + 30 dB) 77 dBm (Filter constraint) Input power < (20 dBm + 33 dB) 53 dBm (Detector constraint) | LINAC2 Load FWR Patch Panel | PG8 | ||||
| S Band Buncher REV | Input power < (47 dBm + 10 dB) 57 dBm (Filter constraint) Input power < (20 dBm + 10 dB) 30 dBm (Detector constraint) | Patch Panel LI1838 | PG8 | ||||
| AS2 FWD | Input power < (47 dBm + 30 dB) 77 dBm (Filter constraint) Input power < (20 dBm + 33 dB) 53 dBm (Detector constraint) 84 dB coupling, input power < -30 dBm | LINAC2 Forward Patch Panel | PG7 | ||||
| AS2 REV | Input power < (47 dBm + 20 dB) 67 dBm (Filter constraint) Input power < (20 dBm + 20 dB) 40 dBm (Detector constraint) | LINAC2 Reverse Patch Panel | PG6 | ||||
| Kly2 FWD | RF Distribution Chassis LI2131 | FE IN J6 | |||||
| Kly2 REV | RF Distribution Chassis LI2131 | RE IN J1 | |||||
| MO | 500 GHz to 3 GHz Multiplier LI1810 | 500 MHz IN PG1 | |||||
| MOD2 Drive | Distribution Chassis Phase Control LI1834 | Amplifier 2 Drive, J6 | |||||


