You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 50 Next »

If you use Google Authenticator on your personal or Lab issued mobile device, Lab policy requires that the device must be configured to use a lock screen (PIN, pattern, fingerprint, etc.).

Choose the tab for your Operating System below:

    1 To install Google Authenticator app, go to the Google Play Store on your phone. Find the Google Authenticator application and install it. Then open the app.

    Google Authenticator for Android icon.png
    2 Tap "Begin setup".
    3

    Then, tap "Scan a barcode".

    If you are missing a "Barcode Scanner", the app will prompt you to install a suggested app. Tap "Install" to the suggested "Barcode Scanner" app. After installation has completed, click "Scan a barcode" once more on Google Authenticator.
    4

    Generate a barcode here: How do I add/remove a Google Authenticator token?

    You must generate a barcode at the above link to continue installation.

    You will only have ONE CHANCE to scan the code generated at the link above.


    5

    If the QR Code scan is successful, you will see the 6-digit OTP (One-Time-Password) on your device. This code is valid for 30-seconds only. You must enter the token when you log in with your username and password. If you happen to take longer than 30 seconds, then use the most current auto-generated OTP.

    1

    Find the Google Authenticator application in the Apple App Store on your phone by using the Search bar (type in "authenticator").

    When you find the listing, tap on the "GET" button, then tap on the "INSTALL" button.

    3 Open the Google Authenticator app, and tap "BEGIN SETUP".
    4 Tap "Scan barcode", then tap "OK" to allow the app to access the camera.

    5

    Generate a barcode here: How do I add/remove a Google Authenticator token?

    You must generate a barcode at the above link to continue installation.

    You will only have ONE CHANCE to scan the code generated at the link above.
    6

    If the barcode scan is successful, you will see the 6-digit OTP (One-Time-Password) on your device. This code is valid for 30-seconds only. As the 30-second time limit approaches, you may see the code turn red. If you cannot enter it immediately, then wait a few seconds and enter the next valid code that will automatically appear.













    • No labels