| Card |
|---|
| Title: | Heat Stress Hazard Assessment and Control | Publication date: | 7/31/2020 | Effective date: | 7/31/2020 |
BRIEFPolicy SummaryLawrence Berkeley National Laboratory's (Berkeley Lab's) Heat Stress Policy addresses the hazards of heat stress at the Laboratory site by: - Listing the different symptoms of heat exhaustion and heatstroke.
- Identifying emergency response actions when someone is determined to be suffering from heat stress.
- Providing preventative measures to avoid heat stress.
Who Should Read This PolicyAll Berkeley Lab employees, casual and participating visitors, affiliates, and subcontractors To Read the Full Policy, Go To:The POLICY tab on this wiki page To Read the ES&H Program Details, Go To:ES&H Manual Chapter 40 EHS Subject Matter for Heat Stress
Environment, Health, and Safety (EHS) Division
|
| Card |
|---|
| Title: | Heat Stress Hazard Assessment and Control | Publication date: | 7/31/2020 | Effective date: | 7/31/2020 |
POLICYA. PurposeLawrence Berkeley National Laboratory's (Berkeley Lab's) Heat Stress Policy addresses the hazards of heat stress at the Laboratory site by: - Listing the different symptoms of heat exhaustion and heatstroke.
- Identifying emergency response actions when someone is determined to be suffering from heat stress.
- Providing preventative measures to avoid heat stress.
B. Persons AffectedAll Berkeley Lab employees, casual and participating visitors, affiliates, and subcontractors C. ExceptionsNone D. Policy Statement- Heat stress — the physical stress of hot environments — can be influenced by a combination of factors, such as the type of clothing worn, physical activity, time spent working, breaks between work activities, and medications; and environmental factors, such as ambient air temperature, air velocity, and relative humidity (Work Process A).
- Self-awareness is a key step to reducing heat-related disorders. Employees and supervisors should terminate exposure to heat stress at the onset of the first symptoms (Work Process A).
- When interior temperatures exceed the recommended guidance range of 65°F to 85°F, division directors, unit heads, and supervisors should use their discretion in modifying employee work assignments, including changes in location, changes in time of the beginning or end of the workday, sharing duties, etc. Line managers should consider employee medical and physical conditions when applying this temperature range as a guideline (Work Process C).
- Heat-related disorders can be caused by prolonged periods of heat stress. Heat exhaustion occurs when the body's ability to regulate body temperature is overwhelmed but not completely broken down. Heatstroke is a life-threatening emergency that requires immediate medical attention. Heatstroke is more likely to occur in outdoor work (Work Process D).
E. Roles and ResponsibilitiesRole | Responsibilities | All Berkeley Lab supervisors and managers | - Arrange first-aid training for workers.
- Monitor the workplace to determine when hot conditions arise.
- Whenever possible, schedule hot jobs for the cooler part of the day.
- Ensure workers drink enough water.
- Take immediate action when workers experience heat stress.
- Make adjustments for workers who must wear personal protective clothing and equipment that retains heat and restricts evaporation of sweat.
- Provide shade when necessary.
- Follow instructions and training for controlling heat stress.
| Workers | - Follow instructions and training for controlling heat stress.
- Recognize the potential for heat stress in the work environment.
- Be alert to symptoms in themselves and others.
- Avoid consumption of excessive caffeine, which can contribute to heat stress.
- Drink small amounts of water regularly to avoid dehydration.
- Use personal protective equipment (PPE) appropriately.
- Contact supervisor or medical services immediately when experiencing symptoms of heat illness.
| Facilities and Projects and Infrastructure Modernization Division Project and Construction Managers | - Issue Stop Work notices to contractors in noncompliance with the Berkeley Lab heat stress program.
- Receive Heat Stress Prevention training.
| Facilities Division — Maintenance and Operations (M&O) | - Provide fans and other means to increase airflow or ventilation in hot work areas.
- Audit work performed by contractors to ensure compliance. Inform the Inspection Group of noncompliance.
| Environment, Health and Safety Division (EHS) | - Provide project-specific guidance and recommendations.
- Help managers determine an appropriate work/rest regime for workers.
|
F. Definitions/AcronymsTerm | Definition | Action Level | Level of concern where a corrective action is taken | Contractor | A contractor employed by Berkeley Lab. Both the contractor and the work crew will be non-Berkeley Lab employees. | PPE (personal protective equipment) | Safety equipment worn by employees; may include safety glasses, respirators, coveralls, gloves, etc. | Thermal Radiation | Transfer of heat from hot objects through air to the body. Working around heat sources, such as furnaces, will increase heat stress. Working in direct sunlight can substantially increase heat stress. | High Humidity | A condition under which the rate of evaporation of sweat from the skin decreases. If the air temperature is as warm as or warmer than the skin during times of high humidity, blood brought to the body's surface cannot dissipate heat. | Wet Bulb Globe Temperature Index (WBGT) | The most-used technique to measure environmental factors that most nearly correlate with deep body temperature and other physiological responses to heat |
G. Recordkeeping RequirementsNone H. Implementing DocumentsDocument number | ES&H Manual Reference | Title | Type | 07.07.016.001 | Chapter 40 | Heat Stress | Program | 07.07.016.002 | Chapter 40, Work Process A | General Requirements | Work Process | 07.07.016.003 | Chapter 40, Work Process B | Control of Heat Stress | Work Process | 07.07.016.004 | Chapter 40, Work Process C | Heat Stress Screening Threshold | Work Process | 07.07.016.005 | Chapter 40, Work Process D | Heat Stress Emergencies | Work Process |
EHS Subject Matter for Heat Stress
Environment, Health, and Safety (EHS) Division J. Revision HistoryDate | Revision | By Whom | Revision Description | Section(s) Affected | Change Type | 1/2/2012 | 0 | Toor | Rewrite for wiki (brief) | All | Minor | 9/25/2012 | 1 | Toor | Rewrite for wiki (policy) | All | Minor | 8/7/2014 | 1 | Young | Adjust next review based on pub date | Doc Info | Editorial | 11/12/2014 | 1.1 | Best | Editorial changes during three-year review |
| Minor | 12/4/2018 | 1.2 | J. Zhu | Change ACGIH reference to 2016 | Driving Requirements | Minor | | 7/31/2020 | 1.3 | J. Zhu | Reference update to Cal/OSHA to reflect 10 CFR 851 variance | Driving Requirements | Minor |
|
| Card |
|---|
| label | Document Information |
|---|
| Title: | Heat Stress Hazard Assessment and Control | Document number | 07.07.016.000 | Revision number | 1.3 | Publication date: | 7/31/2020 | Effective date: | 7/31/2020 | Next review date: | 7/31/2025 | Policy Area: | Industrial Hygiene and Safety | RPM Section (home) | ESH | RPM Section (cross-reference) | none | Functional Division | EHS | Prior reference information (optional) |
|
Source Requirements Documents- California Code of Regulations, Title 8, Section 3395, Heat Illness Prevention
- ACGIH 2016 TLVs and BEIs, Physical Agents, Heat Stress and Strain
Implementing DocumentsDocument number | ES&H Manual Reference | Title | Type | 07.07.016.001 | Chapter 40 | Heat Stress | Program | 07.07.016.002 | Chapter 40, Work Process A | General Requirements | Work Process | 07.07.016.003 | Chapter 40, Work Process B | Control of Heat Stress | Work Process | 07.07.016.004 | Chapter 40, Work Process C | Heat Stress Screening Threshold | Work Process | 07.07.016.005 | Chapter 40, Work Process D | Heat Stress Emergencies | Work Process |
|
| Show If |
|---|
| | Card |
|---|
| label | Additional Information |
|---|
| Title: | Heat Stress Hazard Assessment and Control | Document number | 07.07.016.000 | Revision number | 1.3 | Publication date: | 7/31/2020 | Effective date: | 7/31/2020 | Next review date: | 7/31/2025 | Policy Area: | Industrial Hygiene and Safety | RPM Section (home) | ESH | RPM Section (cross-reference) | none | Functional Division | EHS | Author name/contact info | M. Wisherop |
|
| Revision 0 publication date | 1/2/2012 | Retirement date | n/a | Prior reference information (optional) |
|
|
| Inputs from more than one Functional Area? | No | List additional Functional Areas & contacts |
|
|
| Inputs from more than one Policy Area? | No | List additional Policy Areas & contacts |
|
|
| 30-day notification needed? | No | 30-day start date | n/a | 30-day end date | n/a |
|
| LDAP protected? | No |
|
| Need TABL reminders? | No | Frequency | n/a | Brief reminder text: | n/a |
|
| Approval Sheet for this revision received (date) [Note: author is responsible} |
|
(Policy Area 1), (Policy Area 2), (Section) New terms that need to be added to Glossary/Acronym list:(list items not found and context (Policy Area name) – full definition would be included in Policy) Implementing Documents restricted to department/functional use(optional – these will be used for tracing between requirements and associated documents) Side bars: Side bar 1 location (cite by Policy Section # - for example: Section D.2.a) Sidebar 1 text: Sidebar 2 location Sidebar 2 text: Sidebar 3 location Sidebar 3 text: |
|
|
